AIRBRUSH: Describes a paint spray gun used for precise detailing work and custom painting.
ANGLE GRINDER: Describes a hand-held power tool driven by either compressed air or electricity fitted with a variety of abrasive discs, which will rapidly remove old paint or rough metal from a metal surface.
BLOW GUN: Describes a paint spray gun with a wide nozzle fed by air pressure used to blow out crevices in material that is otherwise hard to reach.
BLOW TORCH: Describes a tool attached to a bottle of flammable gas, which, when the gas is ignited, provides an intense flame for brazing and soldering.
BUFFING TEMPLATE: Describes a machined device of a specific shape used to obtain the required buffed contour in a vehicle body.
BUFFING WHEEL: Describes a disc covered in soft cloth or lambswool powered by a drill that produces a high gloss shine to a vehicle's body surface.
COATED ABRASIVE WHEEL: Describes a power-driven grinding wheel where an abrasive material such as sand or diamond grit is glued to a backing material and used to reduce or smooth a metal body surface.
CLOSED-END CONNECTOR: Describes a solderless connector used to join electric wires together through crimping instead of twisting them together.
COMPRESSED-AIR SPRAY GUN: Describes a type of paint gun that produces a fine spray of paint for coating the surface.
DENT PULLER: Describes a power tool whose strong suction cup can be used to pull out dents in body panels.
DISC SANDER: Describes a round, rubber disc powered by an electric drill and covered with abrasive paper ideal for rough sanding of body parts.
GUN: Describes a device for applying paint or grease.
GRINDER: Describes a device used to remove surplus metal edges from an object.
IMPACT SOCKET: Describes a heavy-duty socket designed for use with air or electric power impact tools that can stand up to extreme stress and can be used with specialist impact accessories such as extensions, universal joints, and adapters.
IMPACT SWIVEL BALL UNIVERSAL JOINT: Describes the swivel ball-type universal joint most used with impact sockets.
IMPACT WRENCH: Describes a pneumatic or electric tool designed for use with impact sockets.
NIBBLER: Describes a kind of power tool used to cut sheet metal without deforming the sheet or causing a burr allowing both circular and straight cuts.
NON-WOVEN ABRASIVE DISC: Describes a type of grinding disc made of very durable material used primarily for cutting metal.
ORBITAL SANDER: Describes a flat, cushioned plate covered with abrasive paper that rotates in an elliptical motion, used for fine sanding work such as feather edging.
SANDER: Describes a power-driven tool fitted with a rotating abrasive disc used for smoothing surfaces.
SOLDERING IRON: Describes a metalworking tool with a copper or iron tip which is heated, electrically or in a flame, and used to melt solder to make joints.
SPRAY GUN: Describes pistol-shaped apparatus that delivers an atomised mist of liquid to an object.
SUCTION-FEED SPRAY GUN: Describes a type of spray gun with a paint pot mounted underneath powered by suction.
TWIST DRILL: Describes a type of specialist metal cutting drill fitted with spiral flutes that allow the chips to exit while the metal cutting process continues.